(download-configurator)=
# Download SLM-MX Configurator

The SLM-MX Configurator is the official software tool for configuring and managing your SLM-MX device and connected modules.

## Current Version

### SLM-MX Configurator v1.1.0.0
**Release Date:** September 2025  
**System Requirements:** Windows 10/11 (64-bit)

{download}`Download SLM-MX Configurator v1.1.0.0 </software/slm-mx/configurator/SLM-MX-Configurator-v1.1.0.0.msix>`

## Installation Instructions

1. **Download** the latest version using the link above
2. **Run** the downloaded `.msix` file
3. **Follow** the installation wizard prompts
4. **Enable network access when prompted**, this is required for the configurator to work.
4. **Launch** the SLM-MX Configurator from your Start Menu

## Features

- **Automatic Device Discovery:** Scan and connect to SLM-MX devices on your network
- **Module Configuration:** Configure all connected I/O modules
- **Network Settings:** Configure IP addresses, DHCP, and network parameters
- **Modbus Mapping:** View and export Modbus register mappings
- **Firmware Updates:** Update SLM-MX and module firmware
- **Offline Configuration:** Create and import configuration files
- **Factory Reset:** Reset devices to factory defaults

## Getting Started

After installation, follow our [Getting Started Guide](index) to:

1. [Scan for your SLM-MX device](scanning-for-device)
2. [Configure connected modules](configuring-modules)
3. [Set up network parameters](system-config)
4. [View Modbus addresses](modbus-addresses)

## Previous Versions

```{note}
We recommend always using the latest version for the best experience and latest features.
```

### Archive
*No previous versions available yet*

## Troubleshooting

### Installation Issues
- **Permissions:** Please enable network access when prompted, this is required for the configurator to work.

### Connection Issues
- Ensure your SLM-MX is powered on and connected to the network
- Check that your computer is on the same network as the SLM-MX
- Try the [manual connection method](manual-connection)

### Need Help?
- Check our [troubleshooting guide](scanning-for-device)
- Contact support at **support@synergy-logic.com**
- Visit our [website](https://www.synergy-logic.com) for additional resources

---

**Next Steps:** [Getting Started with SLM-MX Configurator](index)